| |
Welcome.
 
|
|
|
Fabspeed BMW M3 E90/E92/E93 Performance Package with Resonators
|
|
Active Autowerke Signature S85 (V10) Pulley Kit BMW e60 M5 / e63 M6
|
|
Our Price $2,449.00
|
|
|
Our Price $399.00
|
|
|
|
|
- Fits all BMW E90/E92/E93 M3 2007+
- This package saves 7.7lbs/3.5kg over stock with resonators installed. Without resonators you save 12.6lbs/5.7kg.
- Fabspeed offers this performance package for all V8 M3 platforms.
- This package includes Fabspeed’s 200 cell primary sportcats and X-Pipe catbypass.
- High quality T304 stainless steel, 14-16 gauge C.N.C. mandrel bent for optimum power.
- This package will work with stock muffler or any exhaust system designed to fit like OEM.
- No Check Engine Light
- Complies with 49 state emissions and inspections.
- ECU upgrade is available for $1395.
|
"The Active Autowerke Signature V10 Pulley kit is a complete bolt on kit engineered using Aircraft Grade Billet 6061 Hard Coat Anodized Aluminum. After months of R&D in house and overseas (various climates & conditions) we concluded that there may be a slight power increase by going smaller than our pulley but the trade off is a chance of making the engine run hotter or possibly overheat, we choose reliability over that extra 1-2 rwhp that we may get from a smaller pulley. Another key element in the development of the Signature Pulley Kit was to retain the “Factory Crank hex Drive Adapter”, this was important to keep this factory feature for its inherent purpose. The pulley kit does not modify factory harmonics or dampening. Stronger side walls were the last key element in choosing our size over a smaller design. The Active Autowerke Signature Pulley Kit yields gains of 12+HP on a completely stock car. This is a complete bolt on system that is easily reversible. A must for the true enthusiast."
|
|
|
|
BBS RE One Piece Die Forged Aluminum Wheel BMW e46 M3
|
|
Challenge GT Carbon Fiber Race Trunk BMW e92 M3 Coupes
|
|
Starting From $1,340.00
|
|
|
|
Our Price: $2,395.00
|
|
|
|
|
Wheel Technology:
RE - "BBS Gold" One Piece Die Forged Aluminum Wheel - Weight optimized by FEM analysis
*available finishes: DSK.
|
Designed, engineered, and manufactured in the USA, our GT carbon sports trunk is the perfect addition to your 3 series BMW. Each trunk is constructed by hand from 100% carbon fiber materials inside and out. Additionally carbon Kevlar is added in key areas for strength and rigidity while maintaining maximum weight savings. From the factory, all 3 series models come with a heavy steel trunk. Mass amounts of weight savings from the rear most part of the car can be achieved by swapping to a lightweight version. Not only will you see a difference in handling, acceleration, and chassis response, but a stunning appearance as well. The intergraded spoiler on the trunks edge blends seamlessly with the factory body lines to create a true OEM look with perfect fitment. The trunks spoiler edge will offer additional aerodynamic down force to the rear of the car with minimal drag created.
Full Carbon composite construction
Uses OEM mounting locations, no drilling
Increases front end down force
Weighs only 2 lbs!
|
|
|
|
HRE Competition Forged Series C21
|
|
HRE Monoblok P41 1-Piece Forged Wheel
|
|
Suggested Retail Price in 19" $1,595.00
|
|
|
|
Suggested Retail Price $1,400.00
|
|
|
|
|
HRE's Competition Forged Series - C21
Designed for track and street applications.
- Motorsport inspired styling and exceptional performance
- Engineered to minimize unsprung mass and rotational inertia
- Hand-built craftsmanship to exacting standards
- Customized, precision fitments specifically for your vehicle
- OE TPMS compatible
- Material: Titanium fasteners and aerospace grade 6061-T6 forged aluminum
Available in 18", 19", & 20" for most European vehicles.
Please call 626.968.1188 or email sales@renn-spec.com for pricing.
|
HRE's Monoblok P41 split nine-spoke design is a true blend of modern styling and motorsport performance. The balance and elegance of the radiating, split spokes exude and speed for your finest automobile.
Available in 19" & 20" for most European vehicles.
Please call 626.968.1188 or email sales@renn-spec.com for pricing.
|
|
|
RENN Spec is an authorized dealer of Brembo, Vorsteiner, Stoptech, Alcon, KW Suspension, HRE, DPE, Neez, Eisenmann, Kreissieg, Meisterschaft, Hamann, AC-Schnizter, H&R, Eibach, Tein, Dixis, Ericsson, RECARO, Sparco, MXP, AutoTecknic...and more!
|
|
|
Weekly Special |
|
|
|
Eisenmann Race Performance Exhaust 4x83mm BMW E92 E93 M3
|
|
Retail Price $2,839.00
|
|
|
|
Eisenmann exhausts are engineered and manufactured (Hand-crafted) in Stuttgart, Germany for maximum performance and deep, super sporty sound, using 100 % ultra light weight stainless steel construction. Now available with connecting pipes to make this system a direct bolt-on!
|
|
|
|
 |
|
